Windows XP / Vista / 7/8 / 8.1 / 10 – complete installation package
Bit options: x32 / x64
Driver size: 67 MB
Click to download:
Windows XP / Vista / 7/8 / 8.1 / 10 – basic package for installation
Bit options: x32 / x64
Driver size: 26 MB (x32) and 28 MB (x64)
Click to download (x32):
Click to download (x64):
How to install a driver on Windows 10
For the printer to work correctly, you need to install a special software utility. On this page you can find the most current driver for the HP Deskjet Ink Advantage 3525 MFP. For the convenience of the user, below is a step-by-step guide to installing the device.
After downloading the executable file, you must open it using a standard directory or browser. You will see a window in which basic information about the installed components will be provided. Let’s get acquainted and click “Next”.
The next window provides general information about activating Windows Internet Services, connection usage settings, and more. It is not necessary to read this, so we also click “Next”, having previously checked the checkbox opposite “I have reviewed and accept the agreements and installation parameters”, as shown in the screenshot:
We proceed to the direct configuration of the printer. Select the language “Russian” from the drop-down menu on the right and click on the “Next” button:
The next few steps involve watching the animation tutorials and then following the steps. So, first you need to remove the tape and remove the protective film from the printer. Click “Next”:
Here we connect the power cable. It is important not to confuse it with USB. Then we select “Next”.
We turn on the device using the Power button located on the upper display. Click “Next”.
The next step is to determine the language and regional location on the display of the device. We follow the steps indicated in the image and move on to the next item:
One of the most important points is the correct installation of the cartridge. It takes a long time to explain, so the manufacturer took care of the user by adding a special video. Follow the animation and click Next.
We load paper into the device in the same way as in the previous step – by watching a video. After that, we select the already familiar “Next”:
The last step is aligning the paper correctly. Likewise, check out the animation rendering.
We choose the method of connecting the device to the computer. It is best to set it to “USB”. If it is not possible to connect, select the “Connect” item. In the same way as it was before – click “Next”:
A warning window will pop up, in which you must select “Yes”, agreeing to connect the device using a USB cable. This item is mandatory for further work with the printer.
We connect the printer to the computer using the connector located on the back of the device. If you wish, you can select the item “Continue installation without connecting …”.
The device driver has been successfully installed. Further actions assume following the recommendations for additional configuration described in the window. Click “Finish”.
After installing the necessary software, experts recommend performing an additional printed test using a quality document or image. If there are errors, reinstall the driver using these instructions.