Windows 7/8 / 8.1 / 10
You can install the driver directly from the Windows system without downloading drivers from any sites. This option is described on our website.
Drivers for printing and scanning
You can install two driver options:
Windows 2000/2003 / XP
Bit options: x32
Driver size: 2 MB (x32)
Click to download (PCL5):
Click to download (PCL6):
Click to download (PS):
How to install a driver on Windows 10
You don’t need deep knowledge and experience to install the driver for the HP LaserJet 3030 printer. You can do it yourself, even if you haven’t done anything similar before. Our instructions will help you so that you are not afraid of complex definitions. You can download the distribution kit from this page. There is a link a little higher. To download the driver HP LaserJet 3030 you need to click on it, a window will pop up. Choose a place in it where to save the program.
We click on the distribution kit twice, a window will appear. Click on the upper circle in it (at the bottom of the window), you will see a dot in it, the “Next” button will cease to be pale, click on it.
Here you can immediately press “Next”.
The installation will start. Wait until the blue bar fills the entire horizontal rectangle.
When a small window pops up over the main window, click “Next” in it.
The last stage remains. We need to prepare your printer. Take the wires that come with the device. Which has a standard plug is needed to connect to the outlet. Connect the other cable between the printer and the computer. There is a power button on the device, press it. When done, click “OK”.
Installation is complete, you can reboot the system.