To set up your printer, you need to download the HP LaserJet Pro P1102 driver and install it on your computer. You can read about the installation below. With these drivers, you can customize how your printer works on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10.
Windows 2003/2008 / XP / Vista / 7/8 / 8.1 / 10 – full driver package
Bit options: x32 / x64
Driver size: 143 MB
Click to download:
Windows 7/8 / 8.1 / 10 – basic driver package
If you want to install the basic driver without downloading the driver to your computer, then you can read our instructions.
Windows 2003/2008 / XP / Vista / 7/8 / 8.1 / 10 – update for basic driver
Bit options: x32 / x64
Click to download (x32):
Click to download (x64):
How to install a driver on Windows 10
In order for the operating system to see the connected printer and the device to work normally, you need to install a special program called a driver. It ensures the interaction of the system with new equipment. Windows has its own set of drivers by default. This explains why sometimes the computer itself determines what is connected to it, and can immediately work with a peripheral device. New models of laser printers are released annually, and for obvious reasons there are no drivers for them in Windows. In this case, the user is usually forced to search for them on the Internet. On our site you can download the driver for the HP LaserJet Pro P1102 laser printer.
After the file is copied to our computer, launch it.
The “Getting Started Guide” appears in front of your eyes. Click on the “Install from USB” item.
There is no alternative, we select “Start installation”.
We view the user manual by clicking on the triangle on the player strip at the bottom of the window.
We study the next part of the manual and do everything according to the instructions.
We go further through the manual, which describes in detail the entire process of preparing the printer for work, starting with unpacking. It is not necessary to watch each step, you can skip the videos by clicking on the rewind button.
The next point, the program tells us how to prepare the cartridge for the beginning of work.
We start the installation of the software.
You must select the installation option. Check that the point is in the upper circle and click “Next”.
We select the second line from the list, then “Next”.
In this window, we are asked to determine how to connect the device to the computer. We put a mark in front of the item “Setting up for printing using USB”.
The installer makes the necessary configuration. Make sure the printer is connected to the system unit and turned on. We are waiting for the message about the completion of the installation and close the program.